[asterisk-users] What don't I get about SIP?

[Anthony Rodgers]

Or better yet, set dialplan.impossibleMatchHandling to 2. This should 
disable earlydial altogether.

CP

On Sep 8, 2006, at 2:49 PM, Eric "ManxPower" Wieling wrote:

> Mike wrote:
> > It's not a silly idea, I've been doing some sniffing and debugging 
> with my
> > limited knowledge of the whole process.  I found this in the debug 
> stream
> > after having dialed "965").
> >
> > Notice this line: SIP/2.0 484 Address Incomplete.
> >
> > Is this what I was suspecting, that it knows it could match a pattern
> > (_9XXXXX) with a few more digits and so waiting for those digits 
> from the
> > user?  How can I disable this or turn it off?  The Polycom 501 
> "supports 484
> > responses", but how can I either:
> > 1) Disable it in the phone
> > 2) Disable it in Asterisk
>
> I didn't even know that Polycom supported 484.
>
> Update the dialplan on your Polycom to make sure it will never send a
> partial number.  You will no longer have to press Dial then either.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users