[asterisk-users] Merlin Legend - Working Now!

[Steve Totaro]

Rule #1.  Never read the manual. :-D    

Sterling Moses wrote:
> I was able to track this problem down and solved it with a little 
> manual reading.
>
> I used the remote access features documented on page 3-189 in the 
> Revision 7 manual with a few security tweaks.
>
> I will soon update the wiki with my procedures.
>
> Thanks guys.
>
> Sterling.
>
> On Sep 5, 2006, at 6:00 PM, Steve Totaro wrote:
>
>> I took a different approach with a Definity system and put asterisk 
>> between the Definity and the telco.  For my setup I had to create a 
>> trunk group and a route then tell the Definity to pattern match and 
>> use that new route, it is called ARS Analysis or something obscure.
>> In your setup, you would need to look for trunk to trunk transfer 
>> options or something similar.  I have only worked with a Merlin 
>> Legend a couple of times and didn't get that involved with it.
>> Thanks for reminding me to document my efforts with the Definity, 
>> there is some stuff on Google but nothing close to a step by step 
>> how-to.
>>
>> Thanks,
>> Steve
>>
>> Sterling Moses wrote:
>>> Hello List,
>>>
>>> I was able to track down my issues with the PRI from a few weeks 
>>> back. Turns out the legend switch had a Terminal Equipment ID of 2 
>>> and was supposed to be a 0. Go figure. This was keeping the 
>>> D-Channel from coming up although the rest of the B-Channels were 
>>> up.  It was very easy to configure the legend and the asterisk 
>>> system to talk both ways once we figured out the PRI hang up.
>>>
>>>  I am in the process of writing up a wiki page for the user 
>>> community on how to accomplish a legend to asterisk integration from 
>>> start to finish and have one more issue to solve, so this is where 
>>> all you legend gurus come in to play.
>>>
>>> The system is laid out with Telco PRI connected to Legend which 
>>> connects via PRI to Asterisk. Calls are working both directions 
>>> across the legend<->asterisk pri.
>>>
>>> How can the Legend switch be programmed to provide an outside trunk 
>>> (via the telco pri) to the asterisk server when an asterisk based 
>>> employee attempts an outside call?
>>>
>>> We want an employee to pick up an asterisk line and dial outside the 
>>> company.
>>>
>>> --Sterling.
>>>
>>>
>