[asterisk-users] Diva server 4bri and Portuguese BRI

[Marco Mouta]

pls post your misdn.conf as well as extensions.conf

May be i can help.

Sou Português:)

On 10/29/06, Pedro Silva <pedromsilva1 at gmail.com> wrote:
>
> Thanks Alberto!
>
> I tested with telsampl like you said (with various configurations for
> de diva) and this not works...:(
> The trace is:
> Enter destination address: 273xxxxxx
> <--Conn_Req(273xxxxxx)
> Connect_Con-->
> [29]:Disc_Ind-->
> <--Disc_Res
> **********Call cleared***********
>
> Any idea for the possible problem?
> Thanks and best regards,
> PS.
>
> 2006/10/29, Alberto Pastore <alberto at msoft-italia.com>:
> > Pedro Silva ha scritto:
> > > Hello,
> > >
> > > I need to connect one diva server 4bri to a portuguese BRI interface.
> > > The operator (PT) said that this bri is in point-to-multipoint mode
> > > (S0). Previously one PBX has connected to that interface.
> > > The asterisk and diva drivers are working ok but i cannot communicate
> > > to outside via this bri. Xlite gives me the message: "call failed:
> > > declined".
> > > Anyone have experience with this setup?
> > > What are the main parameters for bri card configuration?
> > > D-channel protocol: ETSI-DSS1 or other?
> > > Interface mode: NT or TE?
> > > Direct Inward Dialing (DID): Yes ou no? (MSN ou DID?)
> > >
> > > Thanks by any kind of help!
> > > Best regards,
> > > PS.
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >   http://lists.digium.com/mailman/listinfo/asterisk-users
> > I'm not sure about Portuguese operators standard, but I bet
> > ETSI-DSS1 should work just fine. The interface mode is surely
> > TE.
> > The DID/MSN should not affect outgoing calls, I generally leave DID
> > off unless the telco company has that service active.
> >
> > If you're using the diva server for linux package from eicon
> > (divas4linux, currently rel. 8.2), you should find a very
> > simple utility named "telsampl" under /usr/lib/eicon/divas
> > which you can run besides asterisk, to test outgoing calls.
> >
> > You should run it with this command line: "telsampl -c x"
> > where x is the bri port you wish to test (1..4)
> > then at the prompt type "c" and enter a pstn number, e.g.
> > your mobile phone, then you can watch the log onscreen.
> >
> > If the outgoing call works, then your isdn setup is correct,
> > and the problem is in asterisk. The message from xlite is not
> > meaningful, as it could occur on many situations.
> > You should watch the debug output on asterisk console.
> >
> > That helped me a lot.
> >
> > Alberto.
> >
> >
> > --
> > --
> > Alberto Pastore
> > B-Press Srl - Gruppo MSoft
> > P.IVA 01697420030
> > P.le Lombardia, 4 - 28100 Novara - Italy
> > Tel. 0321-499508
> > Fax 0321-492974
> > http://www.msoft.it
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Com os melhores cumprimentos,

Marco Mouta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061029/0af6eb00/attachment.htm