[asterisk-users] Re: 0 channels configured with tdm400 (tdm04b rev. G)

[Erick Perez]

More info.

[root at centos ~]# ztcfg -vvvvvv

Zaptel Configuration
======================


Channel map:


0 channels configured.

****************************
cat /etc/modprobe.conf
alias scsi_hostadapter ahci
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias eth0 e100
alias eth1 3c59x
alias wcfxs wctdm
install wctdm /sbin/modprobe --ignore-install wctdm  && /sbin/ztcfg

***********************
[root at centos ~]# cat /etc/asterisk/zaptel.conf
fxsls=1-4
loadzone=us
defaultzone=us

***********************
[root at centos ~]# cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"

           1 WCTDM/0/0
           2 WCTDM/0/1
           3 WCTDM/0/2
           4 WCTDM/0/3
[root at centos ~]#


On 10/27/06, Erick Perez <eaperezh at gmail.com> wrote:
> Hi,
> Some weird problem (or I'm too sleepy) happens with a tdm04B revision G (4fxo)
> Steps:
> modprobe zaptel
> modprobe wctdm
> ztcfg -vv
>
> /etc/zaptel.conf
> fxsls=1-4 # TDM04B
> defaultzone=us
> loadzone=us
>
> /etc/asterisk/zapata.conf
> signalling=fxs_ls
> group=1
> context=incoming
> channel => 1-4
>
> modprobe zaptel and wctdm load fine, however ztcfg -vv shows:
> 0 channels configured
>
> Im using centos 4.4 with
> Asterisk Version 1.2.13
> Zaptel Version 1.2.10
> Libpri Version 1.2.4
>
> Physically looking at the card, the four FXO ports have the green led turned on.
> It has no IRQ conflicts and zaptel compiled cleanly.
> Kernel is 2.6.9-42ELsmp (it's a dual core Intel machine in an Intel 945G board)
>
> Your comments are welcomed.
>


-- 
------------------------------------------------------------
Erick Perez
Panama Sistemas
Integradores de Telefonia IP y Soluciones Para Centros de Datos
Panama, Republica de Panama
Cel Panama. +(507) 6694-4780
------------------------------------------------------------