[asterisk-users] 0 channels configured with tdm400 (tdm04b rev. G)

[Erick Perez]

Hi,
Some weird problem (or I'm too sleepy) happens with a tdm04B revision G (4fxo)
Steps:
modprobe zaptel
modprobe wctdm
ztcfg -vv

/etc/zaptel.conf
fxsls=1-4 # TDM04B
defaultzone=us
loadzone=us

/etc/asterisk/zapata.conf
signalling=fxs_ls
group=1
context=incoming
channel => 1-4

modprobe zaptel and wctdm load fine, however ztcfg -vv shows:
0 channels configured

Im using centos 4.4 with
Asterisk Version 1.2.13
Zaptel Version 1.2.10
Libpri Version 1.2.4

Physically looking at the card, the four FXO ports have the green led turned on.
It has no IRQ conflicts and zaptel compiled cleanly.
Kernel is 2.6.9-42ELsmp (it's a dual core Intel machine in an Intel 945G board)

Your comments are welcomed.