[asterisk-users] asterisk not detecting hangup

[Arkaitz]

I've enabled those options but it's the same.

On 10/25/06, Maxi Belino <maxi.belino at gmail.com> wrote:
> i'm having similar problems (if you find out the solution please post it)
>
> did you try enabling 'callprogress' or 'busydetect' in zapata.conf ?
>
> Maxi
>
> 2006/10/23, Arkaitz <arkaitzj at gmail.com>:
> >
> > Hi,
> > Im working with the following versions:
> > -asterisk-1.2.12.1
> > -zaptel-1.2.9.1
> > And with the following card:
> > 00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
> > Modem/ISDN interface
> >        Subsystem: Unknown device 8085:0003
> >        Flags: bus master, medium devsel, latency 32, IRQ 201
> >        I/O ports at c800 [size=256]
> >        Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
> >        Capabilities: [40] Power Management version 2
> >
> > Identified as:
> > *CLI> zap show status
> > Description                              Alarms     IRQ
>      bpviol
> >   CRC4
> > Wildcard X101P Board 1                   OK         0          0
> >   0
> >
> > And the following lines in zapata.conf(for spanish lines):
> > answeronpolarityswitch=yes
> > hanguponpolarityswitch=yes
> >
> > The problem is that although the calls work correctly the system is
> > unable to detect a pstn hangup and it keeps running even when the
> > other side is calling to another number(not an asterisk ones, asterisk
> > line keeps busy)
> > Any hint?
> > Thanks for your time
> > --
> > Arkaitz
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>


-- 
Arkaitz