[asterisk-users] asterisk not detecting hangup

[Maxi Belino]

i'm having similar problems (if you find out the solution please post it)

did you try enabling 'callprogress' or 'busydetect' in zapata.conf ?

Maxi

2006/10/23, Arkaitz <arkaitzj at gmail.com>:
>
> Hi,
> Im working with the following versions:
> -asterisk-1.2.12.1
> -zaptel-1.2.9.1
> And with the following card:
> 00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
> Modem/ISDN interface
>        Subsystem: Unknown device 8085:0003
>        Flags: bus master, medium devsel, latency 32, IRQ 201
>        I/O ports at c800 [size=256]
>        Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: [40] Power Management version 2
>
> Identified as:
> *CLI> zap show status
> Description                              Alarms     IRQ        bpviol
>   CRC4
> Wildcard X101P Board 1                   OK         0          0
>   0
>
> And the following lines in zapata.conf(for spanish lines):
> answeronpolarityswitch=yes
> hanguponpolarityswitch=yes
>
> The problem is that although the calls work correctly the system is
> unable to detect a pstn hangup and it keeps running even when the
> other side is calling to another number(not an asterisk ones, asterisk
> line keeps busy)
> Any hint?
> Thanks for your time
> --
> Arkaitz
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061025/001feeaf/attachment.htm