[asterisk-users] PRI (TE205P) allways RED/NOP

[Jerry Jones]

zttool is your friend here

red is LOS or no signal coming in


On Oct 26, 2006, at 3:54 AM, Florian Hars wrote:

> I have a TE205P, jumpered for E1, added the missing wct4xxp-line  
> to /etc/modprobe.d/zaptel, zaptel.conf is just
>
> span=1,1,0,ccs,hdb3,crc4,yellow
> span=2,2,0,ccs,hdb3,crc4,yellow
>
> bchan=1-15
> dchan=16
> bchan=17-31
> bchan=32-46
> dchan=47
> bchan=48-62
>
> Which, according to my reading of the documentation I could find,  
> should be correct. ztcfg doesn't complain about anything, yet all I  
> ever get is  RED NOTOPEN for both spans, and the red blinking  
> pattern on the card changes from alternating to synchronous.
> Am I missing something obvious? Did I install during the wrong  
> phase of the
> moon?
>
> And what exactly *is* the meaning of the RED alert? Hardware on  
> fire? Configuration Error? No Cable (this would be plausible, I  
> only want to connect it to the ISDN net once the configuration is  
> in a sensible state)?
>
> Yours, Florian Hars.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users