[asterisk-users] Cisco 2621 NM-HDV VWIC-1MFT1

[David Edwards]

Thanks..

Did I misread the posts? These look like the VWIC-1MFT-T1 is connecting to 
the PSTN and not connecting to a PRI card on an Asterisk box..

We are looking to do the following..

Asterisk PRI card -> VWIC-1MFT-T1 -> SIP ->

Thanks

David


----- Original Message ----- 
From: "Tijl Van den Broeck" <subspawn at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Wednesday, October 18, 2006 3:58 AM
Subject: Re: [asterisk-users] Cisco 2621 NM-HDV VWIC-1MFT1


http://www.voip-info.org/wiki/index.php?page=Asterisk+cisco+FXO is a
good read for that.

I've got a couple of 2600's configured this way, and all seems to work
just fine. One little detail I came across was one-way-audio..
strangely enough that was fixed if I used

Dial(SIP/${EXTEN:1}@c2600-ip-addr,40,to) .. the "o" Dial-option fixed
it in my dialplan, both for outgoing and incoming calls.


SIP calls from the 2600 arrive in your asterisk in the form
03292353 at ip-addr, my approach was to let it use default context, then
match the numbers there with exten and send it off to the individual
contexts from there with Gosub().

Good luck :-)


On 10/18/06, David Edwards <david.edwards at oneringnetworks.com> wrote:
> Steve,
>
> I was just looking for a little info to get me started..
>
> Thanks
>
> David
> ----- Original Message -----
> From: "Steve Blair" <blairs at isc.upenn.edu>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Tuesday, October 17, 2006 19:24
> Subject: Re: [asterisk-users] Cisco 2621 NM-HDV VWIC-1MFT1
>
>
>
> David:
>
>   Do you have a specific problem with this card? If not and you are just
> looking for general information you can try the following document.
>
> -Steve
>
> http://mit.edu/sip/sip.edu/ciscoGW.html
>
>
> David Edwards wrote:
>
> > Hi all,
> >
> > We are trying to use a Cisco 2621 with NM-HDV & VWIC-1MFT1 to connect
> > to a PBX via the PRI card. We want to use it as a gateway to forward
> > all calls to a hosted Asterisk server off-site via SIP.
> >
> > Does any one have any suggestions on how to best approach this?
> >
> > Thanks
> >
> > David
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >--Bandwidth and Colocation provided by Easynews.com --
> >
> >asterisk-users mailing list
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users