[asterisk-users] wrong outgoing caller id with PRI lines: maybe usecallingpres involved?

[Giorgio Incantalupo]

Hi Doug,
I do not use extensions.conf so I cannot show anything but I can assure 
that I do not set the callerid except for parameters inside zapata.conf:

usecallerid = yes
callerid = asreceived

Hope may help.

TIA

Giorgio Incantalupo

Doug Lytle wrote:
> Giorgio Incantalupo wrote:
>> Hi,
>> I have a sangoma PRI card on an Asterisk PBX. I have problem with 
>> outgoing caller ID: when I make an outbound call, the called party 
>> gets xxxxx1 instead of xxxxx240 where xxxxx is the my company prefix 
>> and 240 is the phone extensions I call from.
>> I read something about usecallingpres on wiki but nothing is told 
>> about default and possible values. Is this parameter the real cause 
>> of my wrong caller id?
>>
> How are you setting the caller id before dialing?  Show us the section 
> of your dial plan that handles this.
>
> Doug
>>
>>
>
> -- Ben Franklin quote: "Those who would give up Essential Liberty to 
> purchase a little Temporary Safety, deserve neither Liberty nor Safety."
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>