[asterisk-users] Re: Digium TE410P LED problem

Matt Florell astmattf at gmail.com
Fri Oct 13 07:28:05 MST 2006


On 10/13/06, Tony Mountifield <tony at softins.clara.co.uk> wrote:
> In article <61575c810610130455y1eab8978gdf28b9466a502378 at mail.gmail.com>,
> Matt Florell <astmattf at gmail.com> wrote:
> > Have you tried it in another motherboard? We ran into something
> > similar with a TE405P card, and as soon as we moved it to another
> > machine all of the lights lit up, while placing a new card in the old
> > machine lead to the same lights out. It was a PCI bus issue on the
> > first machine, we replaced the motheroard and all was well.
>
> Sorry, Matt, did you read my fourth paragraph onwards? :-)
> (guess you were in a hurry...)
>
> Cheers
> Tony

Guilty as charged. Very odd that you would receive two cards from them
with the same defect. What is the version of the card?

At least I did share my issues with Digium LEDs, never had these sorts
of problems with my Sangoma cards. I do like the smaller LEDs that
Sangoma uses on their T1/E1 cards better.

MATT---


> > On 10/13/06, Tony Mountifield <tony at softins.clara.co.uk> wrote:
> > > Has anyone else experienced a problem with the LED for span 1 on a TE410P
> > > or TE405P?
> > >
> > > I had a TE410P on which the span 1 LED would not light red, but once the
> > > span was connected, it did correctly light green.
> > >
> > > I RMAed the board to our UK distrbutor and received a replacement. However,
> > > the replacement board displayed the same problem!
> > >
> > > Wondering if it was related to the computer I was putting it in, I removed
> > > the card again intending to put it in a different machine. As I did so,
> > > I happened to notice that one of the wires from the LED was touching the
> > > faceplate. Aha! I moved the wire, re-installed the card, and all was fine.
> > > If only I'd noticed this on the first card :-(
> > >
> > > See the following document for photos.
> > >
> > > http://www.softins.co.uk/TE410P%20LED%20Problem.pdf
> > >
> > > Perhaps Digium could alert their production company and support personnel
> > > to this problem.
> > >
> > > Cheers
> > > Tony
> > > --
> > > Tony Mountifield
> > > Work: tony at softins.co.uk - http://www.softins.co.uk
> > > Play: tony at mountifield.org - http://tony.mountifield.org
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> --
> Tony Mountifield
> Work: tony at softins.co.uk - http://www.softins.co.uk
> Play: tony at mountifield.org - http://tony.mountifield.org
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


More information about the asterisk-users mailing list