[asterisk-users] Asterisk + E1 with MFC/R2 in Argentina?

[Moises Silva]

> DTA0204 loop e
> Incomplete or incorrect ANI was received by CDTI2/CSDTI2 FW (outgoing
> trunk) which reports this fact to the main CPU by SSD messin 9 (NI
> problem report).

As the error message says, "incomplete or incorrect ANI was received",
that is not configured on zaptel hardware, but in MFC/R2 signaling.
That means that you need to match the callerid length ( 7, 8 or
whatever number of digits ) sent by Asterisk to the expected callerid
by the other PBX.

Regards
-- 
"Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"