[asterisk-users] Asterisk + E1 with MFC/R2 in Argentina?

[Angel Heart]

Hello Guys,
   
  Same thing with RR, we are currently intalling Asterisk with Digium TE210P Dual Card. We wanted to interconnect its one(1) E1 Port to a Nortel Meridian PABX and we have this kind of status at PABX side; (see below)
   
  DTI2 LOOP 18 - ENBL 
REF CLK: DSBL
SERVICE RESTORE: YES 
ALARM STATUS: ACCEPTABLE
CH 01 - LCKO TIE   VOD              CH 02 - LCKO TIE   VOD             
CH 03 - LCKO TIE   VOD              CH 04 - LCKO TIE   VOD             
CH 05 - LCKO TIE   VOD              CH 06 - LCKO TIE   VOD             
CH 07 - LCKO TIE   VOD              CH 08 - LCKO TIE   VOD             
CH 09 - LCKO TIE   VOD              CH 10 - LCKO TIE   VOD             
CH 11 - LCKO TIE   VOD              CH 12 - LCKO TIE   VOD             
CH 13 - LCKO TIE   VOD              CH 14 - LCKO TIE   VOD             
CH 15 - LCKO TIE   VOD              CH 16 - LCKO TIE   VOD             
CH 17 - LCKO TIE   VOD              CH 18 - LCKO TIE   VOD             
CH 19 - LCKO TIE   VOD              CH 20 - LCKO TIE   VOD             
CH 21 - LCKO TIE   VOD              CH 22 - LCKO TIE   VOD             
CH 23 - LCKO TIE   VOD              CH 24 - LCKO TIE   VOD             
CH 25 - LCKO TIE   VOD              CH 26 - LCKO TIE   VOD             
CH 27 - LCKO TIE   VOD              CH 28 - LCKO TIE   VOD             
CH 29 - LCKO TIE   VOD              CH 30 - LCKO TIE   VOD             
   
  DCH000 
.***
OVL000 
>
OVL000 
>err dta204
>
  DTA0204 loop e
Incomplete or incorrect ANI was received by CDTI2/CSDTI2 FW (outgoing
trunk) which reports this fact to the main CPU by SSD messin 9 (NI
problem report).
This is a "warning only" message. No additional actions are taken. The
call will be processed regularly. However, FW will use the special
hardcoded in FW value as ANI.
Severity:  Minor

  I wonder what we missed in our configurations. 
   
  Zaptel.conf is as follows;
  span=1,1,0,cas,hdb3
  #
  cas=1-15:1101
  cas=17-31:1101
  dchan=16
   
  loadzone = us
defaultzone = us

  Any assistance is greatly appreciated. Another thing, can we possibly configure the other E1 port for PSTN (ISDN)TieTrunk?
   
  Thank you in advance.
   
  Regards
   
  Angel
   
   
  
"R.R. Libera" <astecomm at gmail.com> wrote:
  Hello,

Has somebody installed this configuration: Asterisk + E1 with MFC/R2 
(Telefónica Argentina) in Argentina before? I need to know if it´s 
possible with MFC/R2 argentine variation.

Thanks in advance.

R.R. Libera
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


 		
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061013/0171e5d2/attachment.htm