[asterisk-users] Hangup or busy when the peer answer outgoing calls

[Eloy Gomez]

	Hi all!!,

	I haven't the 'r' options in the dial command. I also try to turn off
busydetect and callprocess obtaining the same result..
If I turn off polarityswitch, I get hangup instead busy...

	The peer isn't busy because I'm trying with my movil phone, and whit
known automatic operators from my telephony provider... when they answer
my call, asterisk hangup the call..

	Regards..

El mar, 10-10-2006 a las 14:39 -0800, Mojo with Horan & Company, LLC
escribió:
> If your Dial() cmd has an 'r' in the options, could it be that the 
> ringing you're hearing is asterisk-generated, and the remote side 
> actually is busy?  Have you tried turning busydetect=no in zapata.conf?
> Moj
> 
> Eloy Gomez wrote:
> > 	Hi all..
> > 
> > 	I have a problem with my asterisk installation. I'm using a Wilcard
> > X100P clone in Spain. Incoming calls work fine, but when I make a
> > outgoing call, a hear the ringing, and the peer phone ring, when the
> > peer answer, asterisk hangup the call, or say busy.
> > 
> > This is my conf:
> > 
> > zaptel.conf:
> > ---------
> > loadzone = es
> > defaultzone=es
> > fxsks=1
> > 
> > zapata.conf
> > ----------
> > [channels]
> > signalling=fxs_ks
> > busydetect=yes
> > answeronpolarityswitch=yes
> > hanguponpolarityswitch=yes
> > callprogress=yes
> > progzone=es
> > 
> > context = contexto
> > group = 1
> > channel => 1
> > 
> > And this is the asterisk log:  
> > 
> > -- Executing Dial("SIP/200-4803", "ZAP/1/966736800|90") in new stack
> >     -- Called 1/966736800
> >     -- Hungup 'Zap/1-1'
> >   == Everyone is busy/congested at this time (1:0/0/1)
> >     -- Executing PlayTones("SIP/200-4803", "busy") in new stack
> >     -- Executing Wait("SIP/200-4803", "10") in new stack
> >   == Spawn extension (indeos, 0966736800, 103) exited non-zero on
> > 'SIP/200-4803'
> > 
> > Thanks all
> > Eloy.
> > 
> 
-- 
Indeos Consultoria
Eloy Gomez (eloy at indeos.es)
Tel: 966787431
www.indeos.es