[asterisk-users] Hangup or busy when the peer answer outgoing calls

[Mojo with Horan & Company, LLC]

If your Dial() cmd has an 'r' in the options, could it be that the 
ringing you're hearing is asterisk-generated, and the remote side 
actually is busy?  Have you tried turning busydetect=no in zapata.conf?
Moj

Eloy Gomez wrote:
> 	Hi all..
> 
> 	I have a problem with my asterisk installation. I'm using a Wilcard
> X100P clone in Spain. Incoming calls work fine, but when I make a
> outgoing call, a hear the ringing, and the peer phone ring, when the
> peer answer, asterisk hangup the call, or say busy.
> 
> This is my conf:
> 
> zaptel.conf:
> ---------
> loadzone = es
> defaultzone=es
> fxsks=1
> 
> zapata.conf
> ----------
> [channels]
> signalling=fxs_ks
> busydetect=yes
> answeronpolarityswitch=yes
> hanguponpolarityswitch=yes
> callprogress=yes
> progzone=es
> 
> context = contexto
> group = 1
> channel => 1
> 
> And this is the asterisk log:  
> 
> -- Executing Dial("SIP/200-4803", "ZAP/1/966736800|90") in new stack
>     -- Called 1/966736800
>     -- Hungup 'Zap/1-1'
>   == Everyone is busy/congested at this time (1:0/0/1)
>     -- Executing PlayTones("SIP/200-4803", "busy") in new stack
>     -- Executing Wait("SIP/200-4803", "10") in new stack
>   == Spawn extension (indeos, 0966736800, 103) exited non-zero on
> 'SIP/200-4803'
> 
> Thanks all
> Eloy.
> 

-- 
Mojo <mojo at horanappraisals.com>
Office Manager, Horan & Company, LLC
(907) 747-6666 x112