[asterisk-users] Zaphfc woth florz patch

[Giordano Grandis]

Hi guys, i just installed the flortz patch with bristuff-0.2.0-RC8r but
when i load module zaphfc i get this warning message:
 
 
Warning: ignoring syns_slave=0, no such parameter in this module
Warning: ignoring timer_card=1, no such parameter in this module
Module zaphfc loaded, with warnings
 
Zaptel Configuration
======================
 
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
 
Channel map:
 
Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
Channel 04: Individual Clear channel (Default) (Slaves: 04)
Channel 05: Individual Clear channel (Default) (Slaves: 05)
Channel 06: D-channel (Default) (Slaves: 06)
 
6 channels configured.

 
Asterisk starts without problem.
 
Any ideas ?
 
Thanks in advance
 
Giordano
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061003/a1fed247/attachment.htm