[asterisk-users] RE: Asterisk Advice

[Cory Andrews]

Asterisk Advice
Cory J Andrews
++++++++++++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
++++++++++++++
voice - 800.398.VoIP X3402
email - Cory at VOIPSupply.com
AIM - B2CORY
  ----- Original Message ----- 
  From: K Y Iyer 
  To: Asterisk Users Mailing List - Non-Commercial Discussion ; asterisk-users at lists.digium.com 
  Sent: Tuesday, October 03, 2006 6:05 AM
  Subject: [asterisk-users] RE: Asterisk Advice


  Hi

  Looking at using Asterisk for a new remote office with about 200 extensions.  We have an existing EPABX in our central office with about 120 POTS lines.

  The central office and the new office will be connected over a 4Mbps leased line.

  We want to be able to connect our Asterisk box to our EPABX so that people with Asterisk VoIP extensions can dial out using the POTS line - and, of course, receive calls through the POTS line.

  I am informed that we will require a Digium card to connect the Asterisk box to the existing EPABX. This card, I am told is a PRI card that can handle 30 voice channels.  This is fine. 

  My question is -  how many such cards can one Asterisk system handle? 

  What if I want to enable three PRI lines on Asterisk?  Is it recommended to put in three or four PRI cards in one Asterisk box?

  I have a dual Xeon 3.0Ghz (I think!) box with 2GB RAM - this box can be upgraded or changed as well and am running RHEL 4.0 AS on it.

  Thanks very much

  Best wishes

  Iyer 


------------------------------------------------------------------------------


  _______________________________________________
  --Bandwidth and Colocation provided by Easynews.com --

  asterisk-users mailing list
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061003/03442202/attachment.htm