[asterisk-users] Polycom Buddy Watch Broken with 2.0.1 Firmware?

[Scott Higginbotham]

I did the same thing with the Polycom's - upgraded all mine from 1.6.x to
2.0.1 but I had great success and no problem with the buddy watch / presence
feature --- if anything, it works a little better.

Whats your <mac-address>-directory.xml configuration file look like?  Did
you make any changes to the <mac-address-phone.cfg file?  do you have the
line of:

up.useDirectoryNames="1" feature.1.name="presence" feature.1.enabled="1"

In the config?

Scott Higginbotham
Systems / Network Operations Manager
215.259.2185 or 1.800.835.5710 ext 2185
scotth at voicenet.com

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Paul Dugas
Sent: Monday, October 02, 2006 8:01 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Polycom Buddy Watch Broken with 2.0.1
Firmware?


I updated a batch of Polycom IP501 phones and an IP601 to the 2.0.1
firmware to get the new NAT keep-alive feature and the ability to watch
more than a handful of buddy contacts but it appears to have broken the
buddy-watch feature.  Is anyone seeing this?  Anybody know if it's a
Polycom problem or something on the Asterisk end?

I'm running a recent (2 days ago) copy of the 1.2 trunk.  In a rather
bone-headed move, I updated the firmware and Asterisk at the same time
so I'm unable to tell which is the culprit.

Curious,

Paul

--
Paul Dugas, Computer Engineer                Dugas Enterprises, LLC
paul at dugas.cc        phone: 404-932-1355     522 Black Canyon Park
http://dugas.cc        fax: 866-751-6494     Canton, GA 30114 USA
--
This e-mail and any attachments are confidential.  If you receive
this message in error or are not the intended recipient, you should
not retain, distribute, disclose or use any of this information and
you should destroy the e-mail and any attachments or copies.