[asterisk-users] Asterisk connection to a PBX

[asterisk-robert]

Inital setup for testing will be 2-4 channels in order to prove the concept. When successful we may include some PBX systems that do not have available T-1 slots. 


On Wed, 29 Nov 2006 19:18:50 -0800, "Tom Lynn" <tom at tomlynn.com> wrote:
> How many channels do you require?  I'd favor T1 for a few reasons.  Higher
> port density means fewer cards per system, which will mean fewer
> interrupts.  T1s won't require you to tune analog levels.  Echo
> probability
> will be lower.
> 
> On 11/29/06, asterisk-robert <asterisk-robert at robertc.de> wrote:
>>
>>
>> We are thinking of setting up an Asterisk system to route calls between
> 2
>> of our factories. Our idea is to connect an Asterisk box to each PBX and
>> then use SIP(or IAX) to truck between the 2 systems on our internal
> network.
>>
>> I would be interested in any ideas regarding the connection points:
>> 1. Is using Asterisk a good solution?
>> 2. Is using a T-1 card the best way to connect the PBX and Asterisk?
>> 3. If analog is used for the connection is it better for Asterisk to use
>> FXO or FXS cards?
>>
>> Any ideas are appreciated.
>>
>> Robert
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> 
>