[asterisk-users] Asterisk connection to a PBX

[Tom Lynn]

How many channels do you require?  I'd favor T1 for a few reasons.  Higher
port density means fewer cards per system, which will mean fewer
interrupts.  T1s won't require you to tune analog levels.  Echo probability
will be lower.

On 11/29/06, asterisk-robert <asterisk-robert at robertc.de> wrote:
>
>
> We are thinking of setting up an Asterisk system to route calls between 2
> of our factories. Our idea is to connect an Asterisk box to each PBX and
> then use SIP(or IAX) to truck between the 2 systems on our internal network.
>
> I would be interested in any ideas regarding the connection points:
> 1. Is using Asterisk a good solution?
> 2. Is using a T-1 card the best way to connect the PBX and Asterisk?
> 3. If analog is used for the connection is it better for Asterisk to use
> FXO or FXS cards?
>
> Any ideas are appreciated.
>
> Robert
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061129/b4a63fa0/attachment.htm