[asterisk-users] Can anyone enlighten me as to what this means?

[Matt]

Can I set the yield option on asterisk?  The telco confirmed it is set
to CO Yields... which to me doesn't make a whole lot of sence...

On 11/22/06, Rob McKrill <rmckrill at gmail.com> wrote:
> Check with your telco on the "Glare" setting.  They probably have Glare set
> to "CO Yields" which tells their switch to 'yield' to your switch/pbx when
> negotiating which channel to use.  We ran into this problem with our PRI and
> an older phone system that did not give nearly the amount of insight (logs)
> as to what the problem might be.
>
> It sounds like you probably want them to set it to "CPE Yields".
>
>
> On 11/21/06, Matt <mhoppes at gmail.com> wrote:
> >
> > We are doing PRIs into T4XXP cards.   When I call out things are
> > fine... however tonight sometimes on inbound calls I'd get:
> >
> > chan_zap.c: Duplicate setup requested on channel 0/1 already in use on
> span 1
> >
> > in the full debug log followed by a fast busy signal on the calling
> parties end.
> >
> > Anyone know what would cause that?
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>