[asterisk-users] TE110P and TDM400P

[Lincoln Zuljewic Silva]

Ok, now it works:

ideiafix:~# modprobe zaptel
ideiafix:~# modprobe wcte11xp
ZT_CHANCONFIG failed on channel 32: No such device or address (6)
FATAL: Error running install command for wcte11xp
ideiafix:~# modprobe wctdm
ideiafix:~# modprobe wcte11xp


Order to load: zaptel, wctdm, wcte11xp

Thanks a lot Henk !


----- Original Message ----- 
From: "Henk Dick" <henk at osocoms.com>
To: "'Lincoln Zuljewic Silva'" <lsilva at corsidian.com>; "'Asterisk Users 
Mailing List - Non-Commercial Discussion'" <asterisk-users at lists.digium.com>
Sent: Wednesday, November 22, 2006 5:03 PM
Subject: RE: [asterisk-users] TE110P and TDM400P


>I would suggest the following
>
> - remove the drivers
> - load them manually (zaptel, wcte11xp, wctdm)
>
> Run:
>
> Zttools -> should show unconfigured cards.
>
>
> Take:
>
> /etc/zaptel.conf
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15,17-31
> dchan=16
> fxsks=32-35
> loadzone = us
> defaultzone=us
>
> run:
>
> ztcfg -vv
>
> See what it is saying
>
>
> Hope this helps
>
>
>
>
>