[asterisk-users] Can anyone enlighten me as to what this means?

[Rob McKrill]

Check with your telco on the "Glare" setting.  They probably have Glare set
to "CO Yields" which tells their switch to 'yield' to your switch/pbx when
negotiating which channel to use.  We ran into this problem with our PRI and
an older phone system that did not give nearly the amount of insight (logs)
as to what the problem might be.

It sounds like you probably want them to set it to "CPE Yields".


On 11/21/06, Matt <mhoppes at gmail.com> wrote:
>
> We are doing PRIs into T4XXP cards.   When I call out things are
> fine... however tonight sometimes on inbound calls I'd get:
>
> chan_zap.c: Duplicate setup requested on channel 0/1 already in use on
> span 1
>
> in the full debug log followed by a fast busy signal on the calling
> parties end.
>
> Anyone know what would cause that?
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061122/bab8edb2/attachment.htm