[asterisk-users] Dialing from "Placed Calls" on Polycom IP501 doesn't always work

[Anthony Rodgers]

We narrowed this down to when the 'New Call' softkey was used to 
initiate the call. When this key was used, the corresponding 'Placed 
Calls' entry wouldn't work. Any other method of placing the call does 
work.

An upgrade to 1.6.7 fixes the issue.

CP

On Nov 16, 2006, at 4:34 AM, John Marvin wrote:

> Noah Miller wrote:
>
> > I never ran 1.6.6 for any length of time.  1.6.7 and 2.0.1 don't seem
> > to suffer this issue.  2.0.1 has some buddy watch problems, so you 
> may
> > not want to use it, but 1.6.7 should be OK.
>
> I've been running 1.6.6 for quite a while, and I have been quite 
> annoyed
> by this bug. However, the release notes for 1.6.7 did not mention 
> fixing
> this problem, so I did not have any motivation for upgrading. But, 
> since
> you said that you did not see the problem on 1.6.7 I decided to upgrade
> and see if the problem was fixed. It appears to have fixed it, although
> I can't be sure yet, because sometimes a call placed from the "placed
> calls" list did work on 1.6.6, so I don't have enough of a sample size
> yet to be sure the bug is gone. I sure hope it is.
>
> Thanks for the info.
>
> John
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users