[asterisk-users] Attempting native bridge of

[Vicky]

Thats really strange .. if you have made canreinvite=no then it should not
even attampt native bridging and should transcode codecs ..something's fishy
here .. Also try to put canreinvite=no in testulaw exntension too .

On 16/11/06, Victor Toofic <toofics at gmail.com> wrote:
>
> El jue, nov 16 de 2006 a las 18:28 +0530, Vicky comentaba:
> > g729 is not a free codec . YOu have to buy it from digium at rateof $10
> per
> > channel license . If you are just using asterisk and havent bought g729
> > license then asterisk will just do bridging of g729 and wont
> edit/transcode
> > stream .
> >
> > On 16/11/06, Victor Toofic <toofics at gmail.com> wrote:
> > >
> > >I have the following scenario:
> > >
> > >           g729            gsm
> > >  UAS <-----------> * <-----------> UAC
> > >
> > >I am using sipp to generate the calls between the UAC and the UAS and
> > >sending some rtp from the UAC, I want * to do transcoding but as I see
> > >it is not. As long as I know 'Attempting native bridge' means only
> > >passing-through the rtp ¿Am I wrong?
>
> I get the same message even if I'm not using g729:
>
> --Attempting native bridge of SIP/testgsm-081784b0 and
> SIP/testulaw-0817da80
>
>             ulaw            gsm
>    UAS <-----------> * <-----------> UAC
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061116/4d5f82a5/attachment.htm