[asterisk-users] Zaptel configurations in India
K Y Iyer
Iyer at NDTV.COM
Wed Nov 15 05:32:35 MST 2006
Hi
I am testing Asterisk connecting to our Alcatel 4400 PBX. I have a
wcte11xp card - all is well - but we cannot communicate with the Alcatel
- when we try to call an Alcatel extension, we see Error 34 no channels
available on the CLI.
I suspect that this is because of invalid span and signalling parameters
in my config files. Have seen a lot of information on this - but none
of seems to be helping.
We get no errors when we start Asterisk
What does the "YELLOW" indicator mean when I do cat /proc/zaptel/1?
What does "Status: Provisioned, In Alarm, Down, Active" when I see "pri
show span 1"
Thanks very much for any assistance
Best wishes
Iyer
////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////
Zaptel.conf
-----------
span=1,1,0,cas,hdb3
bchan=1-15
dchan=16
bchan=17-31
loadzone=uk
defaultzone=uk
////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////
Zapata.conf
------------
[trunkgroups]
[channels]
language=uk
context=default
switchtype=euroisdn
signalling=pri_cpe
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
immediate=no
channel => 1-15,17-31
////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////
*CLI> zap show channels
Chan Extension Context Language MusicOnHold
pseudo default uk
1 default uk
2 default uk
3 default uk
4 default uk
5 default uk
6 default uk
7 default uk
8 default uk
9 default uk
10 default uk
11 default uk
12 default uk
13 default uk
14 default uk
15 default uk
17 default uk
18 default uk
19 default uk
20 default uk
21 default uk
22 default uk
23 default uk
24 default uk
25 default uk
26 default uk
27 default uk
28 default uk
29 default uk
30 default uk
31 default uk
////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////
*CLI> pri show span 1
Primary D-channel: 16
Status: Provisioned, In Alarm, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////
Cat /proc/interrupts
---------------------
CPU0 CPU1
0: 4300564 4296314 IO-APIC-edge timer
1: 363 429 IO-APIC-edge i8042
2: 0 0 XT-PIC cascade
8: 0 1 IO-APIC-edge rtc
15: 38352 38153 IO-APIC-edge ide1
137: 14622 14304 IO-APIC-level aic7xxx
145: 113222 59 IO-APIC-level eth0
161: 5192 5981 IO-APIC-level uhci_hcd
169: 4221565 4213646 IO-APIC-level wcte11xp
NMI: 0 0
LOC: 8598006 8597974
ERR: 0
MIS: 0
////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////
Ztcvg -v
--------
[root at ast-01 ~]# ztcfg -vvvvvvvv
Zaptel Configuration
======================
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////
[root at ast-01 ~]# cat /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/ YELLOW
1 WCT1/0/1 Clear (In use)
2 WCT1/0/2 Clear (In use)
3 WCT1/0/3 Clear (In use)
4 WCT1/0/4 Clear (In use)
5 WCT1/0/5 Clear (In use)
6 WCT1/0/6 Clear (In use)
7 WCT1/0/7 Clear (In use)
8 WCT1/0/8 Clear (In use)
9 WCT1/0/9 Clear (In use)
10 WCT1/0/10 Clear (In use)
11 WCT1/0/11 Clear (In use)
12 WCT1/0/12 Clear (In use)
13 WCT1/0/13 Clear (In use)
14 WCT1/0/14 Clear (In use)
15 WCT1/0/15 Clear (In use)
16 WCT1/0/16 HDLCFCS (In use)
17 WCT1/0/17 Clear (In use)
18 WCT1/0/18 Clear (In use)
19 WCT1/0/19 Clear (In use)
20 WCT1/0/20 Clear (In use)
21 WCT1/0/21 Clear (In use)
22 WCT1/0/22 Clear (In use)
23 WCT1/0/23 Clear (In use)
24 WCT1/0/24 Clear (In use)
25 WCT1/0/25 Clear (In use)
26 WCT1/0/26 Clear (In use)
27 WCT1/0/27 Clear (In use)
28 WCT1/0/28 Clear (In use)
29 WCT1/0/29 Clear (In use)
30 WCT1/0/30 Clear (In use)
31 WCT1/0/31 Clear (In use)
More information about the asterisk-users
mailing list