[asterisk-users] Problem with FXS ports of TDM400P

[Dovid B]

Was the phone off hook when the card was started ? Also as some one 
mentioned above is there power being provided to the card ?

> Hi,
>
> I've not yet used a TDM400, only a 2400.
> Silly question first, are you connecting the power cable? I don't know 
> what
> happens if you leave it off.
>
> I found that if I have the zaptel & asterisk services enabled, the
> card/drivers do not initialise correctly.
>
> To get my system working, I ended up with the services stopped.
> I added lines in rc.local to remove (rmmod) the card driver & zaptel
> modules, then start zaptel, a delay while other things are started, then
> start asterisk. I'm running Centos 4.4 so the exact commands may be
> different - eg. I use 'service zaptel start' to start zaptel, which then
> loads all the appropriate modules.
>
> This sequence seems to give an absolutely reliable startup (so far...)
>
> The other minor problem I had was getting the settings mixed up in
> /etc/zaptel.conf
> I initially missed the bit of the docs that said to use fxsks for the FXO
> modules connected to outside lines & use fxoks for the FXS modules on 
> local
> extensions.
>
> Hope this is some help,
> Robert Jenkins.
>
>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
>> Gustavo Felisberto
>> Sent: 14 November 2006 21:43
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Problem with FXS ports of TDM400P
>>
>> Gustavo Felisberto wrote:
>> > I just received two TDM400P cards, but I'm having problems
>> with them.
>> >
>> > The full info is at:
>> > http://pastebin.com/824079
>> >
>> > Extra, I'm using :
>> >
>> > libpri-1.2.3
>> > zaptel-1.2.10
>> >
>> > On a x86 stable Gentoo box.
>> > Kernel: 2.6.17
>> > gcc-4.1.1, glibc-2.4-r4
>> >
>> > Is that an hardware problem? Should I try the other card?
>> >
>>
>> I tried the other card and the problem is still there. REALY
>> NEED HELP!!!!
>>