[asterisk-users] Polycom autoprovision behind a NAT

[Curt Shaffer]

I'll try passive and if that doesn't work, I'll email you the configs
offline. Thanks for the offer and the help :-)

 

Curt

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Russ Beaupre
Sent: Monday, November 06, 2006 8:54 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Polycom autoprovision behind a NAT

 

I'm not sure.  We ended up putting in a d-link router to get around the ftp
problem.  In most of our sites we have netscreen 5gt routers and they work
fine.
 





-----Original Message-----
From: "Curt Shaffer" <cshaffer at gmail.com>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users at lists.digium.com>
Date: Mon, 6 Nov 2006 20:35:27 -0600
Subject: RE: [asterisk-users] Polycom autoprovision behind a NAT

If you want that is fine. But as I mentioned when I put the phone on the
same subnet as the ftp server with no NAT it works like a charm. Is there
something in the config that deals with NAT traversal with regards to how it
is provisioned?

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Russ Beaupre
Sent: Monday, November 06, 2006 8:26 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Polycom autoprovision behind a NAT

 

I if you like, I can take a config file(s) and put up over here as a test.
Our ftp is working.  It might be informative.
 

 

-----Original Message-----
From: "Curt Shaffer" <cshaffer at gmail.com>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users at lists.digium.com>
Date: Mon, 6 Nov 2006 20:17:07 -0600
Subject: RE: [asterisk-users] Polycom autoprovision behind a NAT

To be honest I don't know for sure. I am using VSFTPD. I have never needed
to set this with setups I have used it before and there is nothing in the
config that says passive. So I'm guessing that its not. After you asked this
I have googled passive FTP and it seems to be on the money as to what is
going on so I will try passive and see if that helps. Thanks! 

  

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Russ Beaupre
Sent: Monday, November 06, 2006 7:45 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom autoprovision behind a NAT

 

I can confirm that the linksys routers cause ftp problems.  Is your FTP
server set to use pasive mode? 

  

-rb
  

 

-----Original Message-----
From: "Curt Shaffer" <cshaffer at gmail.com>
To: "' Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users at lists.digium.com>
Date: Mon, 6 Nov 2006 19:19:48 -0600
Subject: [asterisk-users] Polycom autoprovision behind a NAT 

I am having an issue with doing FTP auto provisioning of Polycom 501's when
they are behind a NAT. If I put the phone on the same subnet as the
provision server it loads the configs and changes fine but as soon as I put
in behind a NAT it comes up with cannot contact boot server. I have tried
behind and replicated this behind a PIX 501, a Linksys SOHO router and a
Motorolla SOHO router. 

  

Any ideas?

  

Curt 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061106/1c340fac/attachment-0001.htm