[asterisk-users] Polycom autoprovision behind a NAT

Russ Beaupre russ at botech.net
Mon Nov 6 19:26:29 MST 2006


I if you like, I can take a config file(s) and put up over here as a test.  
Our ftp is working.  It might be informative.


-----Original Message-----

From: "Curt Shaffer" <cshaffer at gmail.com>

To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" 
<asterisk-users at lists.digium.com>

Date: Mon, 6 Nov 2006 20:17:07 -0600

Subject: RE: [asterisk-users] Polycom autoprovision behind a NAT






To be honest I don’t know for sure. I am
using VSFTPD. I have never needed to set this with setups I have used it 
before
and there is nothing in the config that says passive. So I’m guessing that 
its
not. After you asked this I have googled passive FTP and it seems to be on 
the
money as to what is going on so I will try passive and see if that helps.
Thanks!





From:asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf OfRuss Beaupre

Sent: Monday, November 06, 2006
7:45 PM

To: Asterisk
 Users Mailing List - Non-Commercial Discussion

Subject: Re: [asterisk-users]
Polycom autoprovision behind a NAT





I
can confirm that the linksys routers cause ftp problems.  Is your FTP
server set to use pasive mode?





-rb


-----Original Message-----

From: "Curt Shaffer" <cshaffer at gmail.com>

To: "'Asterisk Users Mailing List -
 Non-Commercial Discussion'"
<asterisk-users at lists.digium.com>

Date: Mon, 6 Nov 2006 19:19:48 -0600

Subject: [asterisk-users] Polycom autoprovision behind a NAT


I am having an issue with doing FTP auto provisioning of
Polycom 501’s when they are behind a NAT. If I put the phone on the same 
subnet
as the provision server it loads the configs and changes fine but as soon as 
I
put in behind a NAT it comes up with cannot contact boot server. I have 
tried
behind and replicated this behind a PIX 501, a Linksys SOHO router and a
Motorolla SOHO router.


Any ideas?





Curt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061106/e2dae770/attachment.htm


More information about the asterisk-users mailing list