[asterisk-users] Polycom autoprovision behind a NAT

[Curt Shaffer]

To be honest I don't know for sure. I am using VSFTPD. I have never needed
to set this with setups I have used it before and there is nothing in the
config that says passive. So I'm guessing that its not. After you asked this
I have googled passive FTP and it seems to be on the money as to what is
going on so I will try passive and see if that helps. Thanks!

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Russ Beaupre
Sent: Monday, November 06, 2006 7:45 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom autoprovision behind a NAT

 

I can confirm that the linksys routers cause ftp problems.  Is your FTP
server set to use pasive mode? 

 

-rb
 

 

-----Original Message-----
From: "Curt Shaffer" <cshaffer at gmail.com>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users at lists.digium.com>
Date: Mon, 6 Nov 2006 19:19:48 -0600
Subject: [asterisk-users] Polycom autoprovision behind a NAT

I am having an issue with doing FTP auto provisioning of Polycom 501's when
they are behind a NAT. If I put the phone on the same subnet as the
provision server it loads the configs and changes fine but as soon as I put
in behind a NAT it comes up with cannot contact boot server. I have tried
behind and replicated this behind a PIX 501, a Linksys SOHO router and a
Motorolla SOHO router. 

 

Any ideas?

 

Curt

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061106/9d4fc2ca/attachment.htm