[asterisk-users] Lucent TNT Help

[Don]

Hell we sold ours off about 2 1/2 years ago...so I am a little rusty on em 
now...
But this was always a pretty easy manual to look at: 
http://www.hal-pc.org/~ascend/MaxTNT/


----- Original Message ----- 
From: "Corey Frang" <corey at rockriver.net>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Thursday, November 02, 2006 6:27 AM
Subject: [asterisk-users] Lucent TNT Help


> I'm looking for someone familiar with setting up some of the more advanced 
> features of the Lucent TNT, preferably someone with knowledge of Trunk 
> Groups and choosing outgoing PRI channels based on call type and perhaps 
> NPA-NXX
>
> We currently have 8 PRI's.  7 of them are for our dialup pool, the 8th is 
> for our voip. We currently run the dialup PRI's to a seperate TNT
>
> We want to merge these all on to one TNT.
>
> I found out how to do dnis-or-voip for the call type on the voip line 
> which allows me to set based on dialed number if its going to go to a 
> modem or voip call, however, I'm trying to figure out
> how to set up the TNT to have voip origination use a certain PRI in the 
> pool as the primary and then fail over to the other PRI's.  I think it 
> will probally involve setting up trunk groups, but I'm not entirely sure 
> how I would set the trunk group for origination. Can anyone give me some 
> friendly advice to try to figure this out?
>
> -Corey
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.13.21/511 - Release Date: 11/1/2006
>
>