[asterisk-users] channel.c: Unable to request channel ZAP

Forrest Beck jonforrest.beck at gmail.com
Wed Nov 1 20:49:58 MST 2006


What does "zap show channels" show?  Are all the channels shown as in
use? What is set in zapata.conf for resetinterval= ? If anything.  I
believe that resetinterval is used to reset unused channels for any
channels that are left open.

On 10/31/06, Asterisk <asterisk at abraxas.si> wrote:
>
>
>
>
> Hi All,
>
>
>
> I have one rather annoying problem...my PBX can work great for weeks, when
> suddenly I start receiving these messages when I try to make a zaptel call:
>
>
>
> Oct 31 13:52:47 NOTICE[15636] app_dial.c: Unable to create channel of type
> 'ZAP' (cause 34 - Circuit/channel congestion)
>
> Oct 31 13:52:49 NOTICE[15648] channel.c: Unable to request channel
> ZAP/g1/247
>
>
>
> I'm using Sangoma A104 card (with four E1 spans), and these problems are
> only occurring on the first two spans (which are connected to a legacy PBX)
> – the second two spans, which are connected to the Telco, work perfectly.
> Even more: when these messages start to occur, I can hardly initiate any
> call via problematic two spans (1st and 2nd), where I can with no problem
> initiate a new call thru the unproblematic two spans (3rd and 4th).
>
>
>
> Restart of the Asterisk is the only cure so far…
>
>
>
> Does anyone know what could possibly be the cause, or how could I
> troubleshot this problem?
>
>
>
> Regards.
>
> Alex
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>


More information about the asterisk-users mailing list