[Asterisk-Users] TE406P - MFC/R2

[Fernando Lujan]

Fernando Lujan wrote:
> Steve Underwood wrote:
>
>


The problem is almost solved. The card was configured as a T1 interface, 
the selled came and jumped it.

Now I have the following problem. When I call from my legacy pbx, appear 
a event:

*CLI> May 26 12:04:09 WARNING[5215]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/31      <- 0001  [1/       1/Idle          /Idle         ]
May 26 12:04:09 WARNING[5215]: chan_unicall.c:627 unicall_report: MFC/R2 
UniCall/31 Detected
May 26 12:04:09 WARNING[5215]: chan_unicall.c:627 unicall_report: MFC/R2 
UniCall/31 Making a new call with CRN 32769
May 26 12:04:09 WARNING[5215]: chan_unicall.c:627 unicall_report: MFC/R2 
UniCall/31 1101  ->      [2/       2/Idle          /Idle         ]
May 26 12:04:09 WARNING[5215]: chan_unicall.c:2644 handle_uc_event: 
Unicall/31 event Detected
May 26 12:04:54 WARNING[5215]: chan_unicall.c:627 unicall_report: MFC/R2 
UniCall/31      <- 1001  [2/       2/Seize ack     /Seize ack    ]


But this event, doesn't enter in the context which I configure in the 
unicall.conf file. Do I need to change something else?

Thanks again.

Fernando Lujan