[Asterisk-Users] features.conf *1 Call Recording

Dave Morrow david.morrow at autodata.net
Fri May 12 11:12:21 MST 2006


I found the issue.
 
It was my Dial command!
 
In my dialplan I had Dial(SIP/100|20|Ttr,,wW) as this was something I
gleaned from a sample config for call forwarding.  I removed the |20|Ttr
and now the call recording works!  Anyone know what the |20|Ttr did
anyhow?
 
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow at Autodata.net
http://www.autodatasolutions.com <http://www.autodatasolutions.com/> 
 
Tel: (519) 963-3020
Fax: (519) 451-6615
 
< Lead, follow or get out of the way! >
 
This message has originated from Autodata Solutions. The attached
material is the Confidential and Proprietary Information of Autodata
Solutions. This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please delete
this message and notify the Autodata system administrator at
Administrator at autodata.net <mailto:Administrator at autodata.net
<mailto:Administrator at autodata.net> >

 

________________________________

From: Dave Morrow 
Sent: Friday, May 12, 2006 10:41 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] features.conf *1 Call Recording


It's quite strange. When I press *1 I do not hear a tone indicated that
it's even trying to record.
 
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow at Autodata.net
http://www.autodatasolutions.com <http://www.autodatasolutions.com/> 
 
Tel: (519) 963-3020
Fax: (519) 451-6615
 
< Lead, follow or get out of the way! >
 
This message has originated from Autodata Solutions. The attached
material is the Confidential and Proprietary Information of Autodata
Solutions. This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please delete
this message and notify the Autodata system administrator at
Administrator at autodata.net <mailto:Administrator at autodata.net
<mailto:Administrator at autodata.net> >

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dave
Morrow
Sent: Friday, May 12, 2006 8:39 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] features.conf *1 Call Recording


Yes. I did.
 
David Morrow
Technical Systems Lead
Autodata Solutions Company
David.Morrow at Autodata.net
http://www.autodatasolutions.com <http://www.autodatasolutions.com/> 
 
Tel: (519) 963-3020
Fax: (519) 451-6615
 
< Lead, follow or get out of the way! >
 
This message has originated from Autodata Solutions. The attached
material is the Confidential and Proprietary Information of Autodata
Solutions. This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please delete
this message and notify the Autodata system administrator at
Administrator at autodata.net <mailto:Administrator at autodata.net
<mailto:Administrator at autodata.net> >

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Giridhar
Reddy Bandi
Sent: Friday, May 12, 2006 3:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] features.conf *1 Call Recording


did you include automon => *1 in your features.conf ?? 
it should be somthing like this 

[featuremap]
automon => *1           

--Giridhar Bandi 


On 5/12/06, Dave Morrow <david.morrow at autodata.net> wrote: 

	Thanks for the response.  How would I change the DTMF transfer
mode?
	
	
	David Morrow
	Technical Systems Lead
	Autodata Solutions Company
	David.Morrow at Autodata.net 
	http://www.autodatasolutions.com
	
	Tel: (519) 963-3020
	Fax: (519) 451-6615
	
	< Lead, follow or get out of the way! >
	
	This message has originated from Autodata Solutions. The
attached 
	material is the Confidential and Proprietary Information of
Autodata
	Solutions. This email and any files transmitted with it are
confidential
	and intended solely for the use of the individual or entity to
whom they 
	are addressed. If you have received this email in error please
delete
	this message and notify the Autodata system administrator at
	Administrator at autodata.net <mailto: Administrator at autodata.net>
	
	
	-----Original Message-----
	From: asterisk-users-bounces at lists.digium.com 
	[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
Fabio
	Sent: Thursday, May 11, 2006 6:55 PM
	To: Asterisk Users Mailing List - Non-Commercial Discussion 
	Subject: RE: [Asterisk-Users] features.conf *1 Call Recording
	
	if you ar using SIP clients, try changing DTMF transfer mode.
	For test use
	> sip debug
	on your * console, then place a call and watch the output. In
INFO or 
	rfc2833 mode you must see the codes like SIP messages. If you
are using
	inband transfer mode (DTMF codes are  transferred like sounds)
you don't
	see the codes.
	
	Also, try adjusting featuredigittimeout in features.conf :
	
	[general]
	featuredigittimeout = 2000 ; 2 seconds
	
	because the default 500ms is a very short time.
	
	Fabio Olaechea
	
	3Tech SRL
	Calle 48 Nro 632, Of. 67.
	La Plata, CP B1900AMZ
	Buenos Aires, Argentina. 
	Tel. +54 221 445 0244 Ext. 301
	Fax. +54 221 445 0245
	www.trestech.com.ar
	
	
	-----Mensaje original-----
	De: asterisk-users-bounces at lists.digium.com
	[mailto:asterisk-users-bounces at lists.digium.com]En nombre de
Dave Morrow
	Enviado el: Miercoles, 10 de Mayo de 2006 02:48 p.m.
	Para: Asterisk Users Mailing List - Non-Commercial Discussion
	Asunto: RE: [Asterisk-Users] features.conf *1 Call Recording
	
	
	OK. You lost me.
	
	
	David Morrow
	Technical Systems Lead
	Autodata Solutions Company 
	David.Morrow at Autodata.net
	http://www.autodatasolutions.com
	
	Tel: (519) 963-3020
	Fax: (519) 451-6615
	
	< Lead, follow or get out of the way! > 
	
	This message has originated from Autodata Solutions. The
attached
	material is the Confidential and Proprietary Information of
Autodata
	Solutions. This email and any files transmitted with it are
confidential 
	and intended solely for the use of the individual or entity to
whom they
	are addressed. If you have received this email in error please
delete
	this message and notify the Autodata system administrator at
	Administrator at autodata.net <mailto:Administrator at autodata.net>
	
	
	-----Original Message-----
	From: asterisk-users-bounces at lists.digium.com
	[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
Alejandro
	Vargas
	Sent: Wednesday, May 10, 2006 10:29 AM 
	To: Asterisk Users Mailing List - Non-Commercial Discussion
	Subject: Re: [Asterisk-Users] features.conf *1 Call Recording
	
	2006/5/10, Dave Morrow <david.morrow at autodata.net >:
	> I am attempting to setup Asterisk to allow me to press *1
while in a
	> call to use automon to record the call but have had absolutely
no
	> success.  Is there a trick to this?
	
	May be a problem with the way you are sending the dialtones. Try
sending 
	as data.
	
	--
	Alejandro Vargas
	_______________________________________________
	--Bandwidth and Colocation provided by Easynews.com --
	
	Asterisk-Users mailing list
	To UNSUBSCRIBE or update options visit:
	   http://lists.digium.com/mailman/listinfo/asterisk-users
	_______________________________________________ 
	--Bandwidth and Colocation provided by Easynews.com --
	
	Asterisk-Users mailing list
	To UNSUBSCRIBE or update options visit:
	   http://lists.digium.com/mailman/listinfo/asterisk-users
	
	_______________________________________________
	--Bandwidth and Colocation provided by Easynews.com --
	
	Asterisk-Users mailing list 
	To UNSUBSCRIBE or update options visit:
	   http://lists.digium.com/mailman/listinfo/asterisk-users
	_______________________________________________ 
	--Bandwidth and Colocation provided by Easynews.com --
	
	Asterisk-Users mailing list
	To UNSUBSCRIBE or update options visit:
	   http://lists.digium.com/mailman/listinfo/asterisk-users
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060512/87673cc3/attachment.htm


More information about the asterisk-users mailing list