[Asterisk-Users] TDM4xxP

[Steve Totaro]

Roger Gulbranson wrote:
> On Thu, 2006-05-11 at 11:13 -0400, Steve Totaro wrote:
>
>   
>> I was able to install the card and get wctdm to load with the timingonly 
>> = 1 setting. 
>>
>> I cannot run ./zttest though, I get "Unable to open zap interface: No 
>> such device or address" Does this mean that I am not getting timing?
>>     
>
> Is this a 2.6 kernel?  You may need to configure the /dev/zap
> interfaces.
>
>   
>> Do I actually have to configure any of the conf files at all or should 
>> modprobe zaptel, modprobe wctdm without errors be enough.
>>     
>
> It *should* be enough (my comments above withstanding).  NB: I was doing
> this on SPARC Solaris -- there are numerous differences which could
> affect you.
>
>
>   
It is CentOS 2.6.9-34.EL SMP

Is there something in particular I have to configure based on below?

[root at asterisk01 ~]# cd /dev/zap/
[root at asterisk01 zap]# ls -la
total 0
drwxr-xr-x  2 root     root          120 May 11 07:15 .
drwxr-xr-x  9 root     root         4580 May 11 07:15 ..
crw-rw----  1 asterisk asterisk 196, 254 May 11 07:15 channel
crw-rw----  1 asterisk asterisk 196,   0 May 11 07:15 ctl
crw-rw----  1 asterisk asterisk 196, 255 May 11 07:15 pseudo
crw-rw----  1 asterisk asterisk 196, 253 May 11 07:15 timer
[root at asterisk01 zap]#