[Asterisk-Users] Need help configuring TE100P and 3 X100P clonewith MD3200 chipset

[Kerry Garrison]

Are you seriously trying to run 4 cards in one system? The odds of getting
that working are about the odds of Angelina Jolie showing up on my doorstep
ready to whisk me off to....but I digress...you will have serious interrupt
issues trying to get 4 cardss working in one system. I am surprised that you
would fork for a PRI card but use cheap winmodems for analog lines. You will
have much better luck tossing the "x100p" cards and using either SPA-3000's,
a TDM400, or a Mediatrix 1204.

Kerry Garrison
Publisher - http://VOIPSpeak.net
(949) 502-7819 x200 - kerryg at techdatapros.com
http://www.techdatapros.com 
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wai Wu
> Sent: Tuesday, May 02, 2006 7:38 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] Need help configuring TE100P and 3 
> X100P clonewith MD3200 chipset
> 
>  
> I can either get the TE100P working or the 3 X100P clones 
> working, but never both. I have the TE100P connected to a 
> channel bank, and X100P clones to lines from the phone company. 
> 
> 
> This is my zaptel.conf
> 
>  span=1,1,0,d4,ami
>  fxsks=1-24
>  loadzone=us
> 
>  fxols=25-27
>  loadzone=us
> 
> I then do
> 
> [root at asterix root]# modprobe zaptel
> [root at asterix root]# modprobe  wcte11xp
> ZT_CHANCONFIG failed on channel 25: No such device or address (6)
> /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install wcte11xp failed
> /lib/modules/2.4.20-8/misc/wcte11xp.o: insmod wcte11xp failed 
> [root at asterix root]# modprobe wcfxo ZT_CHANCONFIG failed on 
> channel 25: Invalid argument (22) Did you forget that FXS 
> interfaces are configured with FXO signalling and that FXO 
> interfaces use FXS signalling?
> /lib/modules/2.4.20-8/misc/wcfxo.o: post-install wcfxo failed
> /lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed 
> [root at asterix root]# 
> 
> What's wrong with configuration?
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>