[Asterisk-Users] Need help configuring TE100P and 3 X100P clone with MD3200 chipset

[Wai Wu]

I can either get the TE100P working or the 3 X100P clones working, but
never both. I have the TE100P connected to a channel bank, and X100P
clones to lines from the phone company. 


This is my zaptel.conf

 span=1,1,0,d4,ami
 fxsks=1-24
 loadzone=us

 fxols=25-27
 loadzone=us

I then do

[root at asterix root]# modprobe zaptel
[root at asterix root]# modprobe  wcte11xp
ZT_CHANCONFIG failed on channel 25: No such device or address (6)
/lib/modules/2.4.20-8/misc/wcte11xp.o: post-install wcte11xp failed
/lib/modules/2.4.20-8/misc/wcte11xp.o: insmod wcte11xp failed
[root at asterix root]# modprobe wcfxo
ZT_CHANCONFIG failed on channel 25: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?
/lib/modules/2.4.20-8/misc/wcfxo.o: post-install wcfxo failed
/lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed
[root at asterix root]# 

What's wrong with configuration?