[Asterisk-Users] Problems with wcte11xp module

[Ron Wellsted]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> Ok when I modprobe wcte11xp I get the following
> message
>
> ZT_CHANCONFIG failed on channel 26: No such device or
> address
>
> Any ideas?

Hi Jon,

Did you set the E1/T1 jumper on the card correctly?  for UK/Europe it
should be on the E1 position. In the T1 position it would only support
25 channels (24D+1B), EuroISDN provides 31 channels (30D+1B)

Other than that, check the output of lspci which should list a "Network
Controller" like this:
0000:00:0b.0 Network controller: Individual Computers - Jens Schoenfeld
Intel 537

Does your /etc/zaptel.conf file look like this:
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
loadzone=uk
defaultzone=uk


HTH

- --
Ron Wellsted
ron at wellsted.org.uk http://www.wellsted.org.uk
N 52.567623, W 2.137621 Linux Counter No. 202120
FWD:519961
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iQEVAwUBRCr/D0tP/KMNOfRbAQKkDggAnVrSvkdeXuMst66ewpPti3mOaVfTaxyY
L41a7uGXHjGejs/CQZBwRWDnFQ5MhDB9bHuJl2CFt/qh23pD2irMVV3tDnb6waZw
HGppbuQvIvXcGyzmhzNSPgQlLLgPZnapbvRGdJ5UtKJd44IzfXSPxjBR7Mst3nyS
jyEJC+eFwvcsBF9hI7mVQ9YKiDgy1namI8OCKye7pLfdOLZdb8vkM4xaUOgVlo0c
27TbOWtYyfoL8pCaPONhwvk+4vDAcE8uRShNoUV/q2Jk4LXQHaL5B3uPZjypT6rY
QdL3IqDBVcizXiWVX3xXkNK4qdycYA5Q/Art2vXlpqeygjRWywr+rw==
=nwqE
-----END PGP SIGNATURE-----