[Asterisk-Users] zapata configuration & parsing

[David Cook (Canada)]

Hi gang. Just put an FXS port on a Zap interface for the first time. I
can't figure out which parameters in zapata.conf are global and which
ones can be channel specific & nested. I have mucked around with it but
I can't seem to make any effect on the gain levels on a per channel
basis.


dring1context=pbx   }
dring1=0,0,0        } obviously global because it sets conditions for
dring2context=fax   } all inbound calls
dring2=387,321,0    }

signalling=fxs_ks   } is this the "lead" or should channel be the lead
group=1
channel=1-2
rxgain=6            } can this go here to effect just chan 1-2?
txgain=0            }

signalling=fxo_ks
group=2
mailbox=500
channel=3
rxgain=0
txgain=0

mailbox=0000
channel=4
rxgain=0
txgain=0

Thanks, dbc.
--
David Cook (Canada)