[Asterisk-Users] problem configuring a digium quad E1 card

[David Masure]

Hi again,
 
Can you specify the pin order for each end ?
 
thanks
 

-----Message d'origine-----
De : JOSE MANUEL CORTES DAVID
[mailto:asterisk-users-bounces at lists.digium.com]De la part de JOSE
MANUEL CORTES DAVID
Envoyé : mercredi 15 mars 2006 16:28
À : Asterisk Users Mailing List - Non-Commercial Discussion
Objet : RE: [Asterisk-Users] problem configuring a digium quad E1 card


Hi 
 
You need to use a cross-over E1 cable (not an ethernet cross-over one) 
 
Good luck
 
 
Jose Manuel Cortes David
X Semestre Ingenieria Electronica
PONTIFICIA UNIVERSIDAD JAVERIANA

  _____  

De: asterisk-users-bounces at lists.digium.com en nombre de David Masure
Enviado el: Mié 15/03/2006 9:41
Para: asterisk-users at lists.digium.com
Asunto: [Asterisk-Users] problem configuring a digium quad E1 card


 
Hi,
 
I bought a Digium Quad E1 card  model TE406P.  Till now, I can't make it
work...
 
I mean, I have red alarm when I configure one E1.  The provider is in
France (France Télécom) and I use the following zaptel config :
 


span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
 
I'm using Linux 2.6.15 and when I run ztcfg -vvvv, it seems that all
channels are configured...
 
So can someone give me an advice on that matter... maybe someone in
France who already configured that type of access.
 
Also, I would like that you confirm the type of cable which can be used
to connect the card to the Telco : can I use a straight cable or use a
crossed cable with pair 1-2 connect to 4-5 ?
 
Thanks
 
Best regards!
 
David
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060315/7490c8a7/attachment.htm