[Asterisk-Users] Hardware timing source for MeetMe

[Andrew D Kirch]

Mike Clark wrote:
> Will the low cost X100P clones available on ebay provide a solid 
> hardware timing source? Our experience shows that while using ztdummy 
> with no zaptel hardware does allow MeetMe to function, we experience 
> unacceptable levels of delay after four ot five users join the 
> conference. With both TDM400 and Sangoma A101 hardware, we have had 
> 20+ users with no problems.
>
> We have a pure VoIP system installed, that has nor PRI or analog 
> lines, but does have a need for MeetMe. If a $15 card will do the 
> trick, we would obviously rather do that than spend a couple hundred 
> bucks for the same thing. This card would not be used for voice, just 
> timing.
>
> Thanks,
>
> Mike Clark
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
Those do not have timing interfaces on them that I am aware of.