[Asterisk-Users] Cannot load wcfxo -- Please help!

[John Daragon]

Phil Freed wrote:
> I'm afraid that I am at a loss here.  I am new to Asterisk, and have
> successfully set up SIP.  But I cannot get my FXS card working, and I'm
> not sure what else I can try.
> 
> # modprobe wcfxo
> 
> /lib/modules/2.4.21-37.0.1.ELsmp/misc/wcfxo.o: init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.21-37.0.1.ELsmp/misc/wcfxo.o: insmod
> /lib/modules/2.4.21-37.0.1.ELsmp/misc/wcfxo.o failed
> /lib/modules/2.4.21-37.0.1.ELsmp/misc/wcfxo.o: insmod wcfxo failed
> 
> 
> I have a Digium quad card (Freshmaker Rev J) with and FXO daughter card
> (S110M Rev A) in port 3 and an FXS card (X100M  Rev C) in port 4.  Are
> these old cards?  Could that be a problem?
> 
Snip.

IIRC, wcfxo is the driver for the X100P card. The 4 port analog card's
driver used to be called wcfxs. but that led to the sort of confusion
you're experiencing, so it was renamed to wctdm.

js