[Asterisk-Users] Can this config sustain 30 users?

[TSS Support]

Just so you know ... you can't just add up data transfer like that. Also, 
you're dealing with best-case link speed.

Anyway, all of this is sort of meaningless. At high non-transcoded call 
volumes the following sorts of questions are more relevent:

-Is my NIC well supported by Linux?
-Is my disk chipset/controller well supported by Linux?
-Are parts common enough that I can get them quickly when one fails, or will 
I keep spares on hand?

-Keith

----- Original Message ----- 
From: "Erick Perez" <eaperezh at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Tuesday, June 13, 2006 8:14 AM
Subject: Re: [Asterisk-Users] Can this config sustain 30 users?
> Means that the cpu,the ram and the board can achieve (see point b)
> about 34 gigabits of data transfer, but 24 users only generate 3.75
> megabits. So this is more than covered.
> However if we take into account the lowest performing component on
> this system (the sata disks) we go down to 1.5gbits/s which still
> seems to be enough.