[Asterisk-Users] use AT320 international call

[brett at websmyths.com]

On 6/12/2006, "Min Qiu" <mqiu at globalinternetworking.com> wrote:
>Hi all,
>
>The firmware I used is pa168s_iax2_us_151011.bin.
>
>My problem is the handset dial before I finished key in all 
>the numbers, no matter how fast I managed to press the keys.  
>It appeared it always dialed immediately, for example "011862",  
>when I actually ment to dial 0118620xxxxxxxx.  Thus left the 
>remaining numbers "0xxxxxxxx" unsent.
>
>The handset had its dial plan disabled.  It configured to use 
>iax protocol.  My extensions.conf has this:
>
>exten=_01186.,1, dial(SIP/<voipprovider>,60)
>
>and it works fine with other iaxy and Cisco ATA.
>
>Anyone encounter this symptom?  Can you share your experience?
>
>Thanks,
>
>Min

Min _ I amybe shooting in the dark here but - are you using inband DTMF?

My AT320 only dials after I hit the Dial button or it times out.  I do NOT
use inband DTMF.

Brett