[Asterisk-Users] Linksys SRW224P POE Switch

[asterisk]

" What will you be powering with it?  I bought one to power Cisco IP 
phones but realized that it will not power them before it arrived."

What obscure cisco phones are you using ?

You may only need a different fly lead if you have older pre standard phones
otherwise it should work ok.

Fadge


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tom
Sent: 10 June 2006 01:23
To: andres at telesip.net; Asterisk Users Mailing List - Non-Commercial
Discussion; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Linksys SRW224P POE Switch

What will you be powering with it?  I bought one to power Cisco IP 
phones but realized that it will not power them before it arrived.

It is still sitting sealed in the new packaging while I decide what 
to do with it; otherwise I would tell you if it was loud or not.

Tom

At 02:04 PM 6/8/2006, Andres wrote:
>We are currently considering the Linksys POE switch for a small 
>Asterisk office deployment.  There will be no separate wiring closet 
>to put it in.  Can anybody tell me if this switch has a loud 
>fan?  Users would not be able to tolerate a loud noise close 
>by.  Otherwise we will go with a fanless desktop switch.
>
>Thanks,
>
>--
>Andres

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users