[Asterisk-Users] BN8S0 Installation problem - 0 devices registrered

Christophorus Laube bob at semanticedge.de
Sat Jun 3 04:25:45 MST 2006


Oh sorry, chan_misdn supports CAPI. The other question is wether mISDN itself 
provides CAPI support..

> hi
> i am experiencing some problems with the configuration of an BN8S0 Beronet
> card. I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel
> 2.6.16.18 and the enabled the following:
>
> <*> ISDN support
>   x x       Old ISDN4Linux  --->
>   x x ---   CAPI subsystem
>   x x <M>   CAPI2.0 support
>   x x [*]     Verbose reason code reporting (kernel size +=7K)
>   x x [*]     CAPI2.0 Middleware support (EXPERIMENTAL)
>   x x <M>     CAPI2.0 /dev/capi support
>   x x [*]       CAPI2.0 filesystem support
>   x x ---     CAPI hardware drivers
>   x x         Active AVM cards  --->
>   x x         Active Eicon DIVA Server cards  --->
>   x x         Modular ISDN driver  --->
>
>  <M> Support modular ISDN driver
>   x x [*]   Enable memory leak debug for mISDN
>   x x [*]   Support for AVM Fritz!Cards
>   x x [ ]   Support for HFC PCI cards
>   x x [*]   Support for HFC multiport cards (HFC-4S/8S/E1)
>   x x [*]     HFC multiport driver with memory mapped IO
>
>
> after the kernel recompilation and the reboot i build and install
> mISDNuser with make and make install.
>
> The card is recognized by the system, this is the output of lspci:
>
> 00:0d.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
> Controller [HFC-8S] (rev 01)
>
> and i can load hfcmulti and mISDN_dsp without problems...
> all channels are configured in TE mode, i use this modprobe:
>
> /sbin/modprobe hfcmulti layermask=0xf,0xf,0xf,0xf,0xf,0xf,0xf,0xf
> protocol=0x2,0x2,0x2,0x2,0x2,0x2,0x2,0x2 type=0x08
> /sbin/modprobe mISDN_dsp
>
> and this is the output of dmesg:
>
> Modular ISDN Stack core $Revision: 1.34 $
> mISDNd: kernel daemon started
> mISDNd: test event done
> mISDN: HFC-multi driver Rev. 1.41
> 0 devices registered
> mISDN_dsp: Audio DSP  Rev. 1.17 (debug=0x0) EchoCancellor MG2
> mISDN_dsp: DSP clocks every 64 samples. This equals 2 jiffies.
>
>
> why i get 0 devices registrered? where am i wrong?
> thanks in advance
>
> nik
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list