[Asterisk-Users] Asterisk: T1 hunt group setup

[C F]

Looks like you need someone else to do the setup for you.
Anyhow, if you have 23 channels, then it rolls over to the next
channel without any configuration. The only thing that could prevent
your dialplan from handling this nicely is if you have a different
context for each channel in zapata.conf. If you do you should change
it to the same context, and use DP logic to route the calls.

On 6/1/06, Andrei (MPI) <asterisk at markovprocesses.com> wrote:
> Hello everyone,
>
> I'm sure someone had an experience arranging hunt-group setup for
> incoming calls on T1 PRI channels of Digium TE110P card.
>
> For instance, I have main DID channel associated with number (555) 222 0001.
> And I have whole bunch of other DID channels on same T1 card like (555)
> 222 0090,  (555) 222 0091, (555) 222 0093.
>
> My goal is when a call comes to the main number which is (555) 222 0001,
> to have it roll over to the next available T1 channel.
> Or give busy signal to the caller if all channels are busy. To have one
> main number for all calls.
>
> I thought this had to be done in Central Office for our T1 connection
> (like DID setup), and T1 provider keeps telling me that
> this will be function of our phone system (Asterisk).
>
> So, do I literally have to implement some sort of logic in
> extensions.conf, that would allow receive call on main channel and roll
> it over to a next available DID? And keep main DID number free all the time?
>
> Please help!!
>
> Andrei (MPI)
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>