[asterisk-users] FreePBX Inbound Route

[Giedrius Augys]

Hm, I have installed ring group and I'm using it, when I want that all
phones in ringall group would ring. Maybe I must create  *memoryhunt or **hunt
*group. And what about Group Number.

2006/7/28, Tim P <panterafreak at gmail.com>:
>
> You could setup a ring group that included all extensions in your inboundroute, the default for freepbx is to have an anydid/anycid route so any
> calls coming in will be sent to whereever you say (see the inbound routes
> link in freepbx).  You will need to install the ring groups module from the
> modules section (Tools, Modules) to have this capability.
>
> On 7/28/06, Giedrius Augys <voipas at gmail.com> wrote:
>
> > Hi,
> I have SIP trunk. And I also have a lot of SIP clients. If I want to call
> from SIP trunk to the Asterisk SIP client, I need to create Inbound route
> for each endpoint. Maybe is possible to create an endpoint group, because I
> have a lot of SIP endpoints, and it takes a lot of time to create inbound
> routes. Or maybe it's only one way to do that.
> Thanks
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>


-- 
Pagarbiai,
Giedrius Augys
Siauliu Universitetas, IST
IP telefonijos inzinierius
Tel. 8 41 590408
Mob. Tel. 8 678 05790
el. pastas voipas at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060729/7f7ba7a5/attachment.htm