[asterisk-users] Test E1 channel

[Moises Silva]

Oops, i missed the crossover cable part. I have used crossover cable,
so it should work, but  the DNID must be complete. Wich signaling are
you using?

Regards

On 7/7/06, James Hawks <james.hawks at customerfunding.com> wrote:
>
>
>
>
> When you dial directly you are bypassing the zap and just dialing an
> internal extension. So that is probably why dialing directly works. As far
> as the cross over cable between ports 1 and 2 I have never attempted
> something like that before.
>
>
>
>
> James Hawks
>
>
>
> -----Original Message-----
>  From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf
> Of Ralph Liebessohn
>  Sent: Friday, July 07, 2006 6:38 AM
>  To: Asterisk Users Mailing List - Non-Commercial Discussion
>  Subject: [asterisk-users] Test E1 channel
>
>
>
> Hi guys,
>
>  I need to make a configuration to test a E1 channel, so, in the same
> context I created two extensions:
>  exten => 555666,1,Dial(Zap/1/5556662)
>  exten => 5556662,1,Dial(SIP/test)
>
>  On the E1 card I linked with a cross cable the ports 1 and 2. The leds are
> signaling that the connection is ok.
>  But when I call 555666 the calling don't goes to client SIP/test .
>  If I call directly 5556662 rings on SIP/test.
>  Do I have to config something else to receive calls on E1 channels?
>  On monday the real E1 channel will be installed and I must test it.
>
>
>  --
>  Ralph Liebessohn
>  ICQ: 74835911
>  Skype: liebessohn
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>


-- 
"Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"