[asterisk-users] Test E1 channel

[James Hawks]

When you dial directly you are bypassing the zap and just dialing an
internal extension. So that is probably why dialing directly works. As far
as the cross over cable between ports 1 and 2 I have never attempted
something like that before.

 

James Hawks

 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ralph
Liebessohn
Sent: Friday, July 07, 2006 6:38 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Test E1 channel

 

Hi guys,

I need to make a configuration to test a E1 channel, so, in the same context
I created two extensions:
exten => 555666,1,Dial(Zap/1/5556662)
exten => 5556662,1,Dial(SIP/test)

On the E1 card I linked with a cross cable the ports 1 and 2. The leds are
signaling that the connection is ok.
But when I call 555666 the calling don't goes to client SIP/test .
If I call directly 5556662 rings on SIP/test. 
Do I have to config something else to receive calls on E1 channels?
On monday the real E1 channel will be installed and I must test it.


-- 
Ralph Liebessohn
ICQ: 74835911
Skype: liebessohn 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060707/03b621d9/attachment.htm